WESTERN FEATHERLITE ***SERVICE***

Servicing your trailer has never been easier!
Need a repair? Time for a tune-up? Have an accessory to install? Bring your trailer to our Full Service Shop and our trained professionals will get you back on the road in no time!

Please contact us today to schedule your next service appointment!

Owner's Manuals

To download Owner's Manual, please "right-click" on the appropriate file below and select "Save Target As" to save a copy to your computer.

   Featherlite Enclosed Trailer Owner's Manual (File size 1.19 Mb)
   Featherlite Open Trailer Owner's Manual (File size 0.7 Mb)
   Featherlite Coach Trailer Owner's Manual (File size 1.19 Mb)

Viewing the above files requires Adobe's Acrobat Reader. If you don't have it installed, please click to download a free copy:

Recommended Service / Maintenance Intervals

Before Each Use:
   Breakaway Breaks — Battery must be fully charged, connections must be clean.
   Hydraulic Breaks — Check gauge for proper vacuum of 18 in. HG.
   Coupler and Hitch or GN Ball — Check for cracks, pits, flats. Replace w/ball having GVW. Grease. Check locking device.
   Fifth Wheel and Pin — Grease and replace when worn.
   Lights & Signals — Check for proper operation. Verify connection is clean & tight.
   Tires — Check tire pressure when cold. Inflate as needed.
   Lug Bolts & Hub — Check and tighten.

Every 3-6 months:
   Electric Breaks Magnets — Inspect for wear and current draw.
   Electric Breaks Controller — Check for correct amperage & modulation.
   Rubber Mats & Floor — Remove mats and wash both sides and floor.
   Hinges, Doors & Dividers — Inspect. Repair or replace damaged, worn or broken parts.
   Roof Vents — Clean dirt build-up. Lubricate hinges.
   Windows — Clean dirt build-up. Lubricate window slides.
   Tires — Inspect treads & sidewalls thoroughly. Replace tire when treads are worn or a sidewall has a bulge.

Every year or 12,000 miles:
   Axle Attachment Bolts — Check by Featherlite dealer.
   Breaks — Check for scoring and wear, verify operation.
   Breaks Master Cylinder — Check fluid level & replenish. Check for leaks/sticking.
   Break Lines — Inspect for cracks, leaks & kinks.
   Jack, Drop Leg — Grease gears at top.
   Frame Members — Inspect all frame members, bolts & rivets. Repair or replace damaged worn or broken parts.
   Welds — Inspect all welds. Repair as needed.
   Slide-out — Clean dirt build-up. Lubricate slides, shafts and gear.
   Sealed Bearings — Check for free running/replace (not serviceable).
   Unsealed Bearings — Disassemble. Inspect. Assemble and repack.
   Rims — Inspect for cracks & dents. Replace as needed.

Accessibility|Terms of Use|Contact Webmaster||Government Sales||